***This add-on only applies to Carnage, Shredder, and Reaper Grille Guards***
This add-on will also include the 20" light bar.
$250 price is only for the 20" light bar box and LED light bar
Bumper, Grille Guard or any other add-ons are not included
- Grille Guards
- About Bumpers
Extreme Duty Grille Guards
Specialty Grille Guards
Welcome to our "ABOUT BUMPERS" page, here you will learn what makes our bumpers the best choice for your truck.
IRON BULL'S BASE BUMPER
Our base bumper, standard features include, four five inch Round light hole buckets or two five inch Round light hole buckets (depending on your model), a winch plate to mount any winch you want and our "welded through" d-rings to mount any 3/4" shackles. (Lights, winch, and shackles not included with our bumpers) When we say "welded through" we mean a slot is cut in the front plate and the d-ring is inserted and welded on the inside and out. We are the only company that does this. Other bumper companies just put the d-ring on front plate without cutting a slot and weld it once on the outside of the bumper.
Our base bumper is constructed from a sheet of 3/16" plate steel, each piece cut out as its' own, so there is no press braking to ensure maximum strength. Then each piece is jigged into place and fully hand welded from the inside, out, grinded to a smooth, but strong finish then coated with our "Black Shield" coating. We take the extra time to fully weld our bumpers unlike other bumper companies that press brake most of the bumper and stitch weld in only a few places, our bumpers are made to be used and abused not just to look pretty.
Most bumper companies use powder coating or liquid paint as a finish on their bumpers, but we are the only ones to use what we call our "Black Shield" coating it is a premium bed liner like Rhino lining ® or Line-X ®. Unlike powder coating and liquid paint "Black Shield" will not chip off or crack from rocks, instead our coating repels the rocks. Just as we said before our bumpers are made to be used and abused not just to look pretty. (To learn even more about our paint check out our "paint" page) Pictured below is an example of our front base bumper.(Lights, winch, and shackles not included with our bumpers)
REAR BASE BUMPER
Our rear bumpers are just as strong and good looking as the front and include cut outs for your factory license plate lights, trailer plug and sensors(if you have them). About 99% of our rear bumpers are able to use your stock factory receiver hitch, but that 1% of trucks have their factory receiver hitch as a part of the stock bumper so it must come off. If your truck is a part of this 1%, no need to worry because our welded in hitch is included for these trucks and will be stated in the description if your truck is in that 1%.
Our base bumpers can be customized to your needs. Our "Add-Ons" and any of our "Grille Guard" pages are a great place to look to make your bumper your own.
Our Add-ons are accessories to your base bumper, you can change the style of your light holes from round to square. Or you can swap out the front winch plate to a "Eco boost plate" or a 12" or 20" "Light bar plate". These are just a few of our available "Add-Ons" you can chose from so be sure to check out our Add-ons page on the menu and take a look to all of them.
If you looking for some added protection you need to check out our Grille Guards on our "Heavy Duty", Extreme Duty", and "Specialty" pages.
Our "Heavy Duty" Grille Guards feature 2" 1/8th wall tubing bent and welded to base bumper. Our "Extreme Duty" features 2 1/2" 3/16ths wall Schedule 40 Gas Pipe cut and welded rather than bent and welded to the base bumper, these bars will resist the toughest environments you'll encounter. And our "Specialty" Grille Guards feature some of our most innovated designs yet with both 32" and 42" curved light bars concealed in a strong box that can take a hit called "32" and 42" Extreme Vetting" bars. And triple plated ram horns called "Reaper". So make sure to check out all of these awesome Grille Guards found on the "Grille Guards/Add-Ons" tab.
(Pictured below are some examples of variations of Add-ons you can chose)
FRONT BASE BUMPER WITH 2 ROUND LIGHT HOLES
FRONT BASE BUMPER WITH 4 SQUARE LIGHT HOLES
FRONT BASE BUMPER WITH ECOBOOST PLATE, ROUND LIGHT HOLES AND DEFENDER 4 GRILLE GUARD
FRONT BASE BUMPER WITH 20 INCH LIGHT BAR PLATE, SQUARE LIGHTS AND DEFENDER 4 GRILLE GUARD
At Ironbull Bumpers we hand deliver all of our bumpers on our own trucks. This to ensure no shipping damage to your bumper. A estimated time to be made is about 6 weeks. For international shipping please e-mail us for quotes and details.
If you have any questions about our warranty, paint or anything else? go to our "Help Center" tab on menu and select what you need. You contact us for specific questions if you don't found what you're looking for. Send us an email or call us, our phone numbers are at the top or button of our website and you can also click on "Contact" menu or "Contact us" red button at the button right of this page and tell us what you need by email.
REMEMBER. ASK FOR THE BEST, ASK FOR IRON BULL BUMPERS!!
True Lifetime Warranty
All Iron Bull products are warranted for the lifetime of the product after the purchase date against any defects. We warrant to you that our products and all parts and components are free of defects in material or workmanship. Our warranty is expressly limited to the replacement or repair of such products and components. This warranty applies under conditions of normal and proper use. (Iron Bull is not responsible for labor or cost of uninstallation or installation of merchandise, that is the responsibility of the costumer.)
The warranty does not cover defects caused by improper assembly or disassembly defects occurring after purchase due to intentional damage, product modifications, misuse, abuse or negligence and labor or assembly costs.
Iron Bull will not warranty the finish of our products due to exposure of natural elements, and normal wear-and-tear.
This warranty is Non-transferable. Iron Bull's liability is expressly limited to the costs of material for repair or replacement of defective goods and in no event will Iron Bull be liable for incidental or consequential damage resulting from use or misuse of the product.
Any claims made under this warranty must be accompanied by the original damaged product, and written description of the damage and how it happened, and a copy of the original invoice at the time of purchase. The customer is responsible for return shipping charges of merchandise to Iron Bull and shipping cost of merchandise back to costumer in warranty claims. Iron Bull will ONLY cover cost of manufacturing the replacement merchandise or repair of merchandise. Iron Bull is not responsible for labor or cost of uninstallation or installation of merchandise, that is the responsibility of the costumer.
Once the warranty claim is approved Iron Bull will fix or replace the product at no additional charge.
Terms and Conditions of Sale
All standard orders require a 100% payment at the time of order. Payments may be made by VISA / MasterCard /Discover. Products ship standard truck freight. All lead-times quoted at the time purchase are subject to change without prior notice after the sales transaction has taken place. Customer will be notified by phone in such event. Any custom work requires an up-front 100% payment. Custom orders are non-refundable.
If for any reason you are not satisfied with your purchase. You may schedule to return it within 3 days of when you received the product. Simply notify us by phone. We will then issue a Return Goods Authorization Number.
If the items are returned in perfect resalable condition, actual shipping charges paid by Iron Bull will be deducted from the purchase price, unless the return is due to our error. After 3 business days of order ALL SALES ARE FINAL. The following terms must be met by you:
--The Return must be scheduled with us within 3 days of your original receipt of the order.
--The products must be returned in new, resalable condition.
--You must include all packaging materials.
--You must pay any return shipping expense.
Display the RGA # prominently on the outside of the unit to avoid delays to your refund. When we receive the returned merchandise in good order in accordance with the above and within 3 days of original delivery, Iron Bull then has 14 business days to inspect the unit after delivery at which time we will issue credit to your charge account if all of the above are met.
At Iron Bull we are driven to consistently build the highest quality products, to build a product that is to be used, to produce products that are not toys and not just for Hollywood, to provide our customers with the most durable and aesthetically appealing products, AND TO PROVIDE CUSTOMER SERVICE THAT'S SECOND TO NONE. If you have a problem, If you love us, tell a friend.
All of us at Iron Bull are DIE HARD TRUCK GUYS. We are in the dirt, sand and on the trails every weekend. Our products are not made to just look pretty like some of our competition, they are meant to be used and hold up to the torture of the elements. You don't drive with out a seatbelt?.
Don't leave home without protection
Ask for the best, Ask for Iron Bull!!
QUESTIONS? SEND US AN EMAIL!!!